On the 1st of August, Premier Wen Jiabao of the State Council signed the State Council Order No. 531, promulgating the "Regulations on Energy Conservation in Public Institutions." Xinhua News Agency was authorized to broadcast this regulation on the 11th.
The "Regulations" include 6 chapters and 43 articles, which shall come into force on October 1, 2008. This regulation aims to promote energy conservation in public institutions such as state agencies, institutions, and organizations that use all or part of fiscal funds, improve the energy efficiency of public institutions, and play a leading role in the energy conservation of public institutions.
The "Regulations" require public institutions to strengthen energy management, adopt technically feasible and economically reasonable measures, reduce energy consumption, reduce and stop energy waste, and effectively and rationally use energy.
The above-mentioned regulations also require public institutions to designate special personnel to be responsible for energy consumption statistics, truthfully record the raw data of energy consumption measurement, and establish statistical accounts. The public institution shall submit a report on the energy consumption of the previous year to the agency of the administrative department of the people's government at the same level before March 31 of each year.
According to the "Regulations", the State Council and the agencies at the local level and above the people's governments at all levels must carry out energy conservation publicity, education and training in public institutions and popularize energy-saving scientific knowledge. The person in charge of the public agency is fully responsible for the energy conservation work of the unit.
The "Regulations" pointed out that the energy-saving work of public institutions should implement the target responsibility system and the evaluation system, and the completion of energy-saving targets should be taken as the content of the assessment and evaluation of the heads of public institutions.
The "Regulations" require the State Council and the local government departments at or above the county level to work with the relevant departments at the same level to formulate energy conservation plans for public institutions at this level in accordance with the medium- and long-term special plans for energy conservation at the people's government at the same level. Public institutions should implement energy consumption measurement systems, differentiate energy use types, energy consumption systems, energy consumption households, classification, and sub-item measurement, and monitor energy consumption status in real time to detect and correct energy waste in a timely manner.
The "Regulations" emphasize that any unit or individual has the right to report the waste of energy by public institutions, and the relevant departments should promptly investigate and handle the report. Units and individuals that have made outstanding achievements in energy conservation work in public institutions shall be commended and rewarded in accordance with state regulations.
If a public institution violates the above provisions, it will face penalties for correction, notification, and administrative sanctions within a time limit; the staff of the administrative organ affairs agency will abuse their powers, neglect their duties, and engage in malpractices in the supervision and management of energy conservation in public institutions, which will constitute a crime. Criminal responsibility shall be investigated; if it does not constitute a crime, it shall be punished according to law.
The latest data: China's lighting and lighting exports increased by 13.4% from January to July [August 12th Special Olympics: Newly released Olympic hotspots] [August 11th Special Olympics: Tracking Olympics] [August 9th Special Olympics: Most Full opening lighting dynamics] [August 8th Olympic Special Issue: Looking forward to the dream moments]
1
Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Installing the batteries
Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutcs (2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will rc-caculatc. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:0() again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII without other figures. LCD on third line displays''DAY''- "1 "will be showed on numerical part(thc other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untial the maximal cumulative time of 9999 days.
Mode 3: Time/Voltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.
LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 1 .OOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second line displays the miniinum power which ranges in 0.0W~9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line
displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without
other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line
displays the"O VER LOAD" with booming noise to warn the users,( 60470643,
60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third
line described in this intruction take section according to two black
lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight
start light again. (Backlight only light when it connect to AC
power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting
more than 3 seconds(LCD on third line display system defaults price, eg
O.OOCOST/KWH ),the rendered content begins moving up and down which
means that the device has entered the setting mode. Then press FUNCTION
button to change selection and press UP/DOWN to set what you want. (On
pressing once, the figure after domical point will increase or decrease
accordingly. On pressing and hold-on, figures after demical point will
increase or decrease slowly in 2 seconds while figures change quickly
when hold-on time exceeds 2 seconds. When hold-on time reaches 10
seconds or more, the figures after demical point will stop while the
figures before demical point begin to increasing or decreasing.) After
that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again
to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After
setting all above, press COST to return to Mode7 or it will
automatically return to Mode7 without any pressing after setting with data storage.
Power meter double rates, power meter two rates, cost rate socket, power meter cost rate, energy meter cost rate, cost socket, cost plug
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com