Smart home multi-function panel control wiring

If the multi-function panel does not have a driver module, only COM1 can be connected to the communication bus; if it is equipped with a driver module, the wiring method is slightly different depending on the type of the driver module.

Multi-function panel rear cover layout

(1) Multi-function panel (without drive module) Rear cover layout.

(2) Multi-function panel (with single or double block) rear cover layout.

(3) Multi-function panel (with three-way or four-way drive module) rear cover layout.

(4) Communication bus interface arrangement.

1) COM1 is the communication bus interface (8P8C).

2) COM2 is a communication bus expansion interface (8P8C) or a sensor interface (6P4C sensor interface), and both can only have one.

(5) Load terminal arrangement L (phase line in), Ll (first line output), L2 (second line output), L3 (third line output), L4 (fourth line output) .

Multi-function panel wiring

(1) Wiring of multi-function panel (with single drive module). Without the drive module, the multifunction panel only requires COM1 to access the communication bus. When other smart products are installed adjacently, the COM1 interface of the adjacent smart product can be connected through the bus extension interface COM2. If the optional multi panel specification indicates that COM2 is a sensor interface (ie, 6P4C interface), it cannot be used as a communication bus expansion interface.

2) Multi-function panel (with dual drive module) has two outputs (Ll, L2).

3) Multi-function panel (with three-way driver module) has three outputs (Ll, L2, L3).

4) Multi-function panel (with four-channel driver module) has four outputs (Ll, L2, L3, L4).

3. Installation wiring when multi-function panel controls super power equipment

When the control object is a high-power device that is more than 1000W and less than 2000W, the smart socket control can be selected (refer to "Intelligent socket installation wiring"); when the control object is an ultra-high-power equipment greater than 2000W, it can also be used with a relay driver module The multi-function panel drives an intermediate AC contactor, which in turn is driven by an AC contactor.