Irobot sweeping robot failure _irobot sweeping robot repair

Buy sweeping robot notes

If you want to buy a sweeping robot, first you need to evaluate whether your home environment is suitable for sweeping robots?

1, the home environment

Is there a lot of debris and lines on the ground in your home? How high is the height of the furniture from the ground? Is the distance between the furniture very tight?

If it is, and it can't be adjusted, it may not be good for the sweeping robot to work, because the narrow passage and the robot under the furniture can't enter, which has a great influence on the cleaning effect.

Under normal circumstances, the height of the sweeping robot is about 9-11 cm. If the furniture can have legs of about 12cm, it is better to avoid too rich objects on the ground: messy shoes, various wires, children's toys...

If the home is crowded, all kinds of narrow roads, sundries, it may be more convenient to buy a hand-held vacuum cleaner. After all, the work of the sweeping robot is to clean the dust and large particles of the ground for you, too messy, even smooth cleaning can not do, what is clean.

2, the population of the family

Is there an energetic child or pet at home? Is there a person at home for 24 hours?

The child is worried that he will have too many toys on the ground. The energetic pet is worried that the sweeping robot will be tripped over, but if you can do the environment, it is not a big problem with children and pets.

If there are people at home for 24 hours, what you need to worry about is, can the noise of the sweeping robot be tolerated? At present, the sweeping robot on the market, even if the sound is relatively small, is more than 60 decibels. Long-term listening is still a headache. It is generally recommended to open the sweeping robot when there is no one at home. If you can stand the noise, or have no time in the family for about 1 hour, there is no problem.

3. How to choose?

This piece of content is much more.

You need to think about it. Do you like random overlay cleaning or path planning cleaning when the cleaning ability is comparable?

If you like random coverage, recommend the brand iRobot, if you like path planning, recommend the brand Neato.

Buying a sweeping robot note If you want to buy a sweeping robot, first you need to evaluate whether your home environment is suitable for the sweeping robot to work? 1. The environment at home Is there a lot of debris and lines on the ground? How high is the height of the furniture from the ground? Is the distance between the furniture very tight? If it is, and it can't be adjusted, it may not be good for the sweeping robot to work, because the narrow passage and the robot under the furniture can't enter, which has a great influence on the cleaning effect. Under normal circumstances, the height of the sweeping robot is about 9-11 cm. If the furniture can have legs of about 12cm, it is better to avoid too rich objects on the ground: messy shoes, various wires, children's toys... The home is crowded, all kinds of narrow roads, sundries, it is more convenient to buy a hand-held vacuum cleaner. After all, the work of the sweeping robot is to clean the dust and large particles of the ground for you, too messy, even smooth cleaning can not do, what is clean. 2. The population at home Does the family have energetic children or pets? Is there a person at home for 24 hours? The child is worried that he will have too many toys on the ground. The energetic pet is worried that the sweeping robot will be tripped over, but if you can do the environment, it is not a big problem with children and pets. If there are people at home for 24 hours, what you need to worry about is, can the noise of the sweeping robot be tolerated? At present, the sweeping robot on the market, even if the sound is relatively small, is more than 60 decibels. Long-term listening is still a headache. It is generally recommended to open the sweeping robot when there is no one at home. If you can stand the noise, or have no time in the family for about 1 hour, there is no problem. 3. How to choose? This piece of content is much more. You need to think about it. Do you like random overlay cleaning or path planning cleaning when the cleaning ability is comparable? If you like random coverage, recommend the brand iRobot, if you like path planning, recommend the brand Neato. 1 irobot sweeping robot failure _irobot sweeping robot repair What is the fault, there are many faults. The following is for reference: 1. The fan does not turn. Fault Description: Press the start button to start, the fan and brush of the machine will stop for one second, and the wheel will keep turning. The fan and brush will restart three times. After three restarts, the machine will pause and the buzzer will sound an alarm. Maintenance method: 1 Check if the fan is deformed and there is no abnormal noise of the wind blade. If it is, please replace the fan module. 2 Unplug the fan cable and press the start button. If there is no alarm, you need to replace the fan module. 3 Unplug the fan cable and press the start button. If the machine still has an alarm and does not check for an abnormality, you need to replace the motherboard. 2, the main tooth box abnormal sound failure description: press the start button to start, the machine's fan and brush will turn for a few seconds to stop, the wheel will always turn, the fan and brush to restart three times, the machine will pause after three restarts, The buzzer sounds an alarm. Maintenance method: 1 Clean the winding debris on the main brush and the side brush. 2 Unplug the cable of the brush box and press the start button. If there is no alarm, you need to replace the main box. 3 Unplug the cable of the brush box and press the start button. If the machine is still alarming, you need to replace the motherboard. Fault 2 Description: Press the start button to start, the machine turns back and then pause, the alarm light flashes, and the buzzer sounds an alarm. Maintenance method: 1 Clean the sensor, because the sensor is too dirty, causing a sensitive drop; replace the lighter ground to see the effect. 2 Check if the sensor cable is loose or fall off. 3 The ground detector is damaged and needs to be replaced. 3. Suspend the fault description in the running machine: press the start button to start, the machine will pause for a few seconds, the fan, brush and wheel will not turn, restart three times, the machine will pause after three restarts, the buzzer will sound alarm. Maintenance method: 1 If it is rough carpet floor, the resistance of the machine is too great, put the machine on the floor environment and try it. 2 Unplug the left and right wheels to start the machine to check if there is such a bad phenomenon. If there is any, there is a problem with the motherboard. You need to replace the motherboard. If you pull the wheel, it means that the wheel is a problem and you need to replace the wheel. . 4, does not boot Fault Description: Press the switch button can not be turned on. Maintenance method: 1 The machine is placed for too long, the battery is dead, and it needs to be charged by the charging stand or adapter. 2 Please check if the battery cable and the shell connection cable are loose and fall off. 3 If the machine switches frequently, please check if the button switch is damaged. 4 When it is not the above reasons, you need to replace the motherboard. 5, does not shut down Fault description: After booting, press the switch button, you can not shut down. Maintenance method: 1 If the machine switches frequently, please check if the button switch is damaged. 2 Please check if the cable connection cable is loose. If it is not detected, it will need to be replaced. 6, the brush does not turn fault description: the main brush turns, the side brush does not turn; the main brush and the side brush do not turn the maintenance method: 1 check whether the main brush is in the turn, if the main brush is in the turn Check if the side brush is entangled with foreign matter. If the main brush and the side brush are not able to rotate, then loosen the main tooth box screw to see if the start is rotating. If it cannot rotate, only the main tooth box can be replaced. Regardless of the power-on shutdown fan/brush always rotates. Description: The fan/brush has been rotated after shutdown. Maintenance method: Replace the main board 8, the left/right wheel does not turn. Description: After the machine is started, the left/right wheel does not rotate, the main hair The brush/fan is working properly. Maintenance method: 1 Check the left and right wheels to check if there is any foreign matter stuck and the socket is loose. 2 If only one wheel does not turn, exchange the left and right wheel sockets to start the machine to check if the machine is still not turning. If it is, the wheel that does not turn is broken, you need to replace the wheel. If not, you need to replace the motherboard. 3 The machine starts to walk sideways, pauses after stopping or hitting the wall, indicating that the motherboard is broken, and the motherboard needs to be replaced. 9. The remote control is not sensitive. Fault description: The buttons on the remote control can sometimes be remotely controlled and sometimes cannot be remotely controlled. Maintenance method: 1 Check if the voltage of the remote control battery is too low. 2 The machine cannot be placed in front of the opened charging stand and virtual wall (cannot be remotely controlled within 3M from the charging stand and virtual wall). Please unplug the charging stand and turn off the virtual wall before performing remote control. 3 Turn on the charging stand, let the machine switch to find the charging seat mode to run, see if the machine can automatically turn when looking for the charging stand, can turn the circle to indicate the problem of the remote control, if it can not turn, it means that the machine receiving head has a problem, replace keyboard. 10, remote control has no effect / does not find the charging seat Fault Description: After the boot, the buttons on the remote control have no effect; when the machine is looking for the charging stand, do not circle the repair method: 1 When the remote control has no effect, if the charging stand is found normally, then The explanation is that the remote control itself has a problem. Check whether the battery has power and whether the battery voltage is normal. A battery that has no power needs to be replaced with a battery of the same specification. If the machine does not rotate when looking for the charging stand, it means that the receiving head of the machine keypad/display panel is defective, and it is necessary to change the keypad or the receiving head. 2 The machine is only remotely controlled after manual power-on. When it is manually turned off, it cannot be remotely controlled. 11. The machine is not charging. Description: When charging the machine with an adapter or charging stand, the green light of the machine does not flash. Maintenance method: 1 Check if the adapter is good, and the adapter with indicator light must be lit. The adapter can't be charged. Check if the machine can be charged on the automatic charging stand. If the automatic charging stand can be charged, the adapter is broken and needs to be replaced. 2 If the adapter and the charging stand are not charged, check that the machine wheel does not turn. If it does not turn, the wheel drive IC 8958/4612 breaks down and causes the battery to be short-circuited. If it cannot be turned on, the battery has been damaged, or the battery has been short-circuited. The motherboard needs to be replaced and the battery can be charged and activated. 3 green light can flash, but still does not charge, indicating that the motherboard is bad, you need to replace the motherboard. 4 Green light does not flash, but still has electricity after charging for a period of time, indicating that the green light is bad, replace the green light or the keypad. 12, the machine is placed for too long, charging does not enter the power Fault Description: When the machine is placed for more than one month, it can not be turned on, charging the host, the green light will be extinguished after a while, the prompt is fully charged. Work will be out of power for a while. Maintenance method: Use the adapter to directly charge the host. After the green light is off, it still needs to be charged for one hour. At this time, it is a small battery charge, which is used to activate the battery. After one hour, the machine stops charging for one minute and recharges the host again. It can be charged normally. If it doesn't work, please replenish it for another hour and activate the battery again. This way, you can activate the battery completely three times. 13. The machine is in trouble. Fault description: The machine is stuck by the special items on the ground. 1 The machine is wrapped by wires, wires and other things scattered on the ground. 2 The machine is entangled by the drooping curtains or the like of the carpet. 3 There are too many obstacles in front of the machine. If the machine can't get out within a certain period of time, the alarm will be suspended. 14, does not boot after charging Fault Description: When the machine is charging, the battery is hot, when the machine is not charging, it can not open the machine. Maintenance method: This is caused by the poor internal consistency of the battery. It only needs to wait for the temperature switch to recover, and the machine can work normally. By charging and discharging the battery three times, the internal consistency of the battery can be repaired. 15, the button is not working Fault Description: The buttons on the button board sometimes have a role, sometimes no effect. Repair method; replace the keypad or replace the button of the same specification. 16. Continuously retreating to the left turn Fault description: After the machine starts, it will retreat, then turn left, then turn back and turn left, and cycle. Maintenance method; 1 Check that there is a wireless material card in the sensor, and if necessary, re-install the line. 2 Check if the air guiding opening is broken or falling off. 3 Change the right wheel and then check the machine to check if there is a continuous backward left turn. If you continue to retreat the left turn, replace the main board. 17. Continuously retreating to the right turn Fault Description: After the machine starts, it will retreat, then turn right, then turn back and turn right, and cycle. Maintenance method: 1 Check that there is a wireless material card into the left sensor of the motherboard, and if so, open it and reinstall it. 2 Change the revolver to another machine and check if there is a continuous retreat of the right turn. If you continue to retreat to the right turn, replace the motherboard. 18, left and right back alarm Fault description: the machine starts to pause for about 1 second and red light alarm Maintenance method: 1 Check all the ground detectors for loose or loose socket. 2 Check the sensor wire by hand and check if there is any falling off. If it is not, you need to replace the motherboard. Fault 2 Description: The machine starts to retreat after a few seconds, and pauses and red light alarm. Maintenance method: 1 Check the sensor lens for something to cover and stick. 2 Replace a ground racing machine with a relatively white color and observe whether there is a red alarm at the left and right. 3 Check all the sensors on the ground detector for loose or loose sockets. Check the sensor wires with your hand and check if there is any falling off. If not, you need to replace the motherboard. 19, red light alarm fault description: start immediately alarm maintenance method: When starting, the wheel brush does not turn on the red light alarm, first charge the adapter for a few seconds, observe whether the machine can charge normally, then put the DC charging line Unplug and restart the machine. If the machine still starts the alarm, you need to replace a DC charging stand. 20, the cleaning effect is not good, the suction becomes smaller. Fault description: The dust is not clean when the machine sweeps the floor. Maintenance method: Check the dust box, the dust inlet, whether the dust cover is too dirty or not, and whether the sweep is normal. Is the battery dead? 21. The machine suddenly stops working during operation. Fault description: When the machine runs, it suddenly stops/shutdown. Maintenance method: 1 Check if the power of the machine is exhausted, and the power is automatically turned off. At this time, manual charging is required. 2 Check if the machine works in the fixed point mode, and the machine will pause after 10 minutes in the fixed point mode. 22, noise increase fault description: the sound of the running machine suddenly becomes large Maintenance method: 1 If the sudden increase of the sound of the running machine, observe whether the machine has entered the clockwise fixed point cleaning mode, if it is into the fixed point mode, it is a normal phenomenon It will recover automatically after a while. 2 If the machine has a sharp sound in the automatic cleaning mode, check if the dust box is installed and check if the brush and dust box are dirty. 3 If there is a serious abnormal noise, adjust the machine to the automatic charging mode to observe whether there is any abnormal noise. If there is abnormal noise, it means the abnormal sound of the main tooth box of the brush, check the brush wheel for foreign matter. If it is stuck, the main tooth box needs to be replaced. If there is no abnormal noise, it means that the fan is abnormal. Check if the fan is stuck with foreign objects. Otherwise, the fan needs to be replaced. 23, the machine's anti-drop failure or failure Description: Occasionally the running machine will fall off the steps or pause at the edge of the step and red light alarm Maintenance method: 1 First, we must determine the step height must be greater than 8CM. 2 Please check if the sensor at the bottom of the machine is too dirty or obstructed. A machine with a partially smooth or reflective area may cause the anti-drop function to deteriorate. 3 Check if the machine is working under strong sunlight. Please do not stack fragile items under the table or steps cleaned by the machine to prevent the machine from falling under the influence of the environment with a minimum probability.

Corner Light Series

Corner light ,led Corner light ,Waterproof Corner Light,Bright LED corner light

Kindwin Technology (H.K.) Limited , https://www.ktlleds.com

Posted on