It is said that good products are always internal and external (though this does not know where to come from, like the beginning of Meizu's ~ ~) today our protagonist - the new version of the millet routing, as Xiaomi "transformation" After pursuing quality, let's take a look at the internals of the new millet route.
Disassemble tools debut
Today's protagonist - new version of millet routing (1TB version)
Just got the millet route, Xiao Bian looked for a long time did not find the breakthrough to disassemble, until found this a little suspicious non-slip mat ~ ~ then use a pointed tweezers inserted into the mat below, it really was found hidden in the following Screws.
Screw sticker with millet logo
Now that we have found a breakthrough, the rest is a matter of course.
Shining my delicate small screwdriver
There are four long screws
When all four screws are removed, everyone must remember to turn the entire machine over and open the router's enclosure.
Open the shell of the small route, you can see the metal protective cover used to fix the hard disk, in order to achieve a better cooling effect, the metal cover over the full hole. The entire protective cover is full of metal.
Remove the screws around the metal cover and open the metal cover to see the built-in 3.5-inch mechanical hard disk with a 1TB capacity. This time must be careful, because at this time the hard disk is also connected by a data line and the lower part of the machine, if too hard, there may be data line breaks. Below the hard disk is a layer of metal cover, in which the raised mesh metal cover should be used for heat dissipation of the cooling fan below. However, because of the obstruction of the data cable of the hard disk, our next step needs to split the hard disk and the connection line at the bottom of the route.
On one side of the metal cover, there is a metal baffle for protecting the connection wire. After removing the screws and baffles of the metal cover, the metal cover can be opened to see the built-in hard disk.
The interface card used to connect the hard disk is very tight, so it needs a relatively sharp tool to remove it. After removal, the built-in hard drive can be removed. At this point, everyone who wants to replace the hard disk for the new millet route should know how to do it.
The new version of the millet routed Seagate's 3.5-inch mechanical hard drive.
With the hard drive removed, we can proceed smoothly with the next step. Through the holes in the metal hood, we already know that there is a black metal radiator on the next floor.
Remove the metal cover, we see is a whole piece of black aluminum alloy heat sink, heat sink plate is the heat sink we often see on the laptop motherboard, where the fan through a data line and heat The board below the board is connected. Remove the heat sink to see the router board at the bottom.
The heat sink on the top of the board also has a design that specifically dissipates heat for each chip of the motherboard. The workmanship is very detailed. Disassemble to proceed to this step, Xiaobian for the overall design of the new millet routing has finally got a whole understanding. It must be said that the new millet route through this sandwich design, making a cooling fan can heat the motherboard and hard drive at the same time, can be described as the best of both worlds.
(The following is a close-up of a big wave motherboard)
Neat printed millet logo and slogan on the motherboard
The motherboard of the new millet routing is very neat and we ended up with the close-up of the routing chip.
Our company is specialized in supplying high quality Brass Fitting including,nuts,union,connector,elbow,tee,distributor,adapter,other Copper/Brass Products like Copper Tube ,air conditioner valve,sight glass,hand valve, Access Valve , Filter Drier ,Solenoid Valve,Capillary Tube and so on. Standard can be according to customers` requirement, we can provide you all kings of standards.The structure and dimension of each fitting is customizable, ensuring customers are getting the right fitting for their needs.Our parts have been exported to over 50 countries all over the world.
Brass Fitting
Refrigeration Ball Valve,Brass Hose Fitting,Air Conditioner Ball Valve,Ball Valve With Charging Port
ZHEJIANG ICE LOONG ENVIRONMENTAL SCI-TECH CO.,LTD. , https://www.china-refrigerantgas.com