The use of wall-mounted flat-panel televisions is not only space-saving but beautiful, and therefore it is loved by many owners. However, wall-mounted TVs are very particular about the installation environment, installation of walls, and installation processes. TV hangs on the wall, it is generally realized by using a fixed rack. Fix the TV to the wall without falling by fixing the matching hanger to the wall and then fixing the TV to the pylon.
1, wall mount TV on the installation surface requirements
With respect to the requirements for wall-mounted TV mounting surfaces, the standards for the installation of flat-panel TVs have stipulated that the mounting surface of flat-panel TVs needs to be solid and strong and have sufficient carrying capacity. When the installation surface is a building wall, it must be solid brick, concrete or its equivalent strength installation surface.
If the installation surface is a loose material installation surface, such as the old-style house brick, wooden structure, or the surface of the installation surface is too thick, the strength is obviously insufficient, should take appropriate reinforcement and support measures.
2, wall mount TV mounting surface reinforcement method
If the installation surface does not meet the requirements, appropriate reinforcement and support measures must be taken. Specifically, the reinforcement is mainly performed on the partial wall of the wall-mounted television to increase the local load-bearing capacity.
One method of reinforcing the mounting surface of the wall-mounted TV is to open the wall and partially fill the concrete; secondly, to add a plate with better nail holding power on both sides of the partial wall, such as a large core board as a support. In addition, steel reinforcements can also be used locally. In short, there are many methods for wall reinforcement, and the most appropriate method can be selected according to the actual situation.
3, the installation surface of a decorative layer treatment
Many TV backdrops have a decorative layer. For this kind of TV background wall, when the wall-mounted TV is punched, it must pass through the facing layer. The bolt must penetrate into the wall inside the facing layer; if the wall is cement or solid brick wall, the wall-mounted TV can be hung on. On the wall; if the wall does not meet the requirements, to strengthen the treatment, then the later wall-mounted TV punching through the decorative layer, playing on the reinforcement of the wall; if the use of light steel keel made of the finish In the wall structure, the TV can be hung on the keel.
Living room wall TV socket height:
1, first analyze the viewing distance, and then determine the height of the socket according to the appearance of the TV.
Usually sitting on the sofa, the height of the horizontal line of the eye level of the TV is almost the same. Power outlets, antenna jacks, etc. are set behind the TV.
2, the general wall hanging TV screen ground should be 750mm from the ground, the height of the socket should be 850mm~1000mm high, and then from the height of the AV cable to the back of the TV cabinet to lead a Φ50mm PVC pipe threading, but some of the wall mounted TV back plate fixed, socket The installation height will bring a lot of inconvenience to the loading and unloading of the power cable and AV cable thickness. Therefore, the socket can also be installed at a distance of 100mm from the countertop (the distance between the bottom of the socket and the countertop). This makes loading and unloading of the power cable and AV cable extremely convenient. However, the biggest drawback of this method is that the power cables, AV cables, etc., that are led to wall-mounted TVs are exposed, and some people seem to have a bad appearance.
3, if the power line and cable TV (original equipment) are too long, you need to bundle up and hide behind.
In addition, according to the location of the TV, combined with the size of the TV, to install the location of the socket, the lower end of the TV can be aligned with the bottom, there is enough space to plug the TV socket can be.
Compared with the installation of TV cabinets directly on the wall, TVs have become a decorative element that integrates into home furnishings. This not only meets the current mainstream aesthetic trend, but also eliminates the need for a TV cabinet and saves space. However, at the same time, wall-mounted TVs require higher installation environment, more complicated installation, and higher installation costs. Therefore, for families that already have TV cabinets and do not have embedded pipes, it is a more cost-effective method to put TV directly on the TV cabinet.
3.00mm Board To Board Connector
Shenzhen CGE Electronics Co.,Ltd , https://www.cgeconnector.com