Model NO.: sps
Certification: ISO9001, BV
Power Supply: 12-30VDC
Measuring Range: -0.1...1MPa to 60MPa
Working Temperature: -30ºC~80ºC
Material: Stainless Steel
Output Signal Type: Analog Type
Accuracy: ≤0.5%Fs
Measuring Media: Gas, Liquid
Long-Term Stability: ±0.3%Fs/Year
Temperature Error: ±0.02%Fs/°c(Zero / Full Span)
Application Field: Food and Pharmaceuticals Industry
Trademark: WNK
Transport Package: Paper Carton and as Buyer′s Requirement
Specification: BV
Origin: Hefei, Anhui
Model NO.: sps
Certification: ISO9001, BV
Power Supply: 12-30VDC
Measuring Range: -0.1...1MPa to 60MPa
Working Temperature: -30ºC~80ºC
Material: Stainless Steel
Output Signal Type: Analog Type
Accuracy: ≤0.5%Fs
Measuring Media: Gas, Liquid
Long-Term Stability: ±0.3%Fs/Year
Temperature Error: ±0.02%Fs/°c(Zero / Full Span)
Application Field: Food and Pharmaceuticals Industry
Trademark: WNK
Transport Package: Paper Carton and as Buyer′s Requirement
Specification: BV
Origin: Hefei, Anhui
SPSÂ Flat Membrane Vegetable Oil Sanitary Electronic Pressure SwitchThe pressure switch SPS is designed for pressure monitoring and measure-ment in liquid and gaseous media. The SPS is suited for general industrial applications such as machine and plant engineering, in machine tool systems, in hydraulic and pneumatic systems, for pressure monitoring and control and for pumps and compressors. It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs (PNP or NPN). In addition, there are configurations available with an analog output signal (0...20mA| 420 mA or 0...5V| 010 V) as well as with RS485 Link.
WNK Intelligent Switch Series:
SPS Intelligent Pressure Switch
SLS Intelligent Level Switch
STS Intelligent Temperature Switch
SPS-1 Intelligent Sanitary Flat Diaphram Pressure Switch
 Features - SPS Sanitary Electronic Pressure Switch
1.  Sanitary type used in food and pharmaceuticals industry
2. Â Gas and liquid pressure measurement
3.  PNP switching, voltage and current outputs
4.  Switching can be set normally open / normally closed
5.  Supporting Switching delay
6.  Various analog output ways available
7.  Displaying pressure peak value and environment temperature
8.  Analog output span settable
9.  OLED self-luminous display
10.  Display turnable 180°
11.  Housing with electrical connection against process connection rotatable 330°
12.  Switching points settable
13.  Various display pressure units
14.  Parameters setting up for Password protection
15.  Support MODBUS communication
Specification -  SPS Sanitary Electronic Pressure Switch
Â
| Product name | Electronic Smart Pressure Switch |
| Measuring range | -0.10.1MPa to 60MPa |
| Measuring media | Gas & Fluid |
| Accuracy | ≤0.5%FS |
| Supply power | 1230V DC |
| Temp. error | ±0.02%FS/ºC(Zero/ Full Span) |
| Long-term stability | ±0.3%FS/Year |
| Analog output accuracy | ≤±0.2%FS |
| Output configurations | 2×PNP + 0V~5VDC/10VDC + MODBUS |
| 2×PNP + 0mA/4mA~20mADC + MODBUS | |
| Switch current | 1.0A(Max.) |
| Switching type | Normally open / closed (settable) |
| Switching reponce time | <10ms |
| Swith delay | 0.00s~1000.0s |
| Switching motion mode | Delay or windows mode |
| Analog signal output and max ohmic load RL | Current output   0/4...20mA, 20...4mA   RL≤0.5k |
| Voltage output   0...5/10v, 5/10...0v   RL>10k | |
| Screen display | OLED |
| Menu language | Chinese and English |
| Switch indicating | 2 Red LED |
| Displaying units | psi,bar,mbar,Pa,kPa,MPa |
| Buttons | 3 blue back-lighted touch buttons |
| Supplementary variables displaying | Environment temperature, analog output value, max peak value,mini peak value |
| Supplementary variables displaying way | Fixed displaying or switch display by INFO button |
| Working temperature | -30-80ºC |
| Media temperature | -30-80ºC |
| Storage temperature | -40ºC~80ºC |
| Electromagnetism compatible | GB/T 17626.2/3/4-2006 |
| Shock resistance | ≤10g/10Hz...500Hz(IEC 60068-2-6-2007) |
| Vibration resistance | ≤50g/11ms(IEC 60068-2-27-2008) |
| Protection class | IP65 |
Dimensions
Â
Payment Terms
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
SPS Flat Membrane Vegetable Oil Sanitary Electronic Pressure Switch1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
The pressure switch SPS is designed for pressure monitoring and measure-ment in liquid and gaseous media. The SPS is suited for general industrial applications such as machine and plant engineering, in machine tool systems, in hydraulic and pneumatic systems, for pressure monitoring and control and for pumps and compressors. It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs (PNP or NPN). In addition, there are configurations available with an analog output signal (0...20mA| 420 mA or 0...5V| 010 V) as well as with RS485 Link.
WNK Intelligent Switch Series:
SPS Intelligent Pressure Switch
SLS Intelligent Level Switch
STS Intelligent Temperature Switch
SPS-1 Intelligent Sanitary Flat Diaphram Pressure Switch
 Features - SPS Sanitary Electronic Pressure Switch
1.  Sanitary type used in food and pharmaceuticals industry
2. Â Gas and liquid pressure measurement
3.  PNP switching, voltage and current outputs
4.  Switching can be set normally open / normally closed
5.  Supporting Switching delay
6.  Various analog output ways available
7.  Displaying pressure peak value and environment temperature
8.  Analog output span settable
9.  OLED self-luminous display
10.  Display turnable 180°
11.  Housing with electrical connection against process connection rotatable 330°
12.  Switching points settable
13.  Various display pressure units
14.  Parameters setting up for Password protection
15.  Support MODBUS communication
Specification -  SPS Sanitary Electronic Pressure Switch
Â
| Product name | Electronic Smart Pressure Switch |
| Measuring range | -0.10.1MPa to 60MPa |
| Measuring media | Gas & Fluid |
| Accuracy | ≤0.5%FS |
| Supply power | 1230V DC |
| Temp. error | ±0.02%FS/ºC(Zero/ Full Span) |
| Long-term stability | ±0.3%FS/Year |
| Analog output accuracy | ≤±0.2%FS |
| Output configurations | 2×PNP + 0V~5VDC/10VDC + MODBUS |
| 2×PNP + 0mA/4mA~20mADC + MODBUS | |
| Switch current | 1.0A(Max.) |
| Switching type | Normally open / closed (settable) |
| Switching reponce time | <10ms |
| Swith delay | 0.00s~1000.0s |
| Switching motion mode | Delay or windows mode |
| Analog signal output and max ohmic load RL | Current output   0/4...20mA, 20...4mA   RL≤0.5k |
| Voltage output   0...5/10v, 5/10...0v   RL>10k | |
| Screen display | OLED |
| Menu language | Chinese and English |
| Switch indicating | 2 Red LED |
| Displaying units | psi,bar,mbar,Pa,kPa,MPa |
| Buttons | 3 blue back-lighted touch buttons |
| Supplementary variables displaying | Environment temperature, analog output value, max peak value,mini peak value |
| Supplementary variables displaying way | Fixed displaying or switch display by INFO button |
| Working temperature | -30-80ºC |
| Media temperature | -30-80ºC |
| Storage temperature | -40ºC~80ºC |
| Electromagnetism compatible | GB/T 17626.2/3/4-2006 |
| Shock resistance | ≤10g/10Hz...500Hz(IEC 60068-2-6-2007) |
| Vibration resistance | ≤50g/11ms(IEC 60068-2-27-2008) |
| Protection class | IP65 |
Dimensions
Â
Payment Terms
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
Nowadays, the function and appearance of mobile phones are similar, but the charging interface is not unified. The Android camp has Micro USB and Type-C ports, while the iPhone camp has Lightning. Different charging ports use different charging cables, which is very unfriendly for users who often need to use multiple phones. To solve this awkward situation, the three-in-one data cable was born. What is the three-in-one data cable? Three-in-one data cable means that one data cable includes Micro Usb Cable, USB Cable For Iphone and Usb Cable Type C. So one data cable can be used by all mobile phones.
Three-in-one data line is also known as multifunctional data cable. In the original data cable, the combination scheme is added, and the combination PCB is configured, which can support a variety of equipment and avoid the trouble of frequently looking for data line. It combines Lightning, a 30-pin port, and a Micro USB port, and is compatible with multiple devices. It can connect to any smartphone or tablet, including iPhone, iPad, Samsung, etc.
From the technical point of view, the three-in-one data cable does have a strong advantage. With continuous development and improvement, three in one data cable products in the original data cable appearance with woven cloth, will also add a light color on the three in one data cable, so that the data cable function is stronger and more exquisite, more and more people accept and buy. In the era of big data,the 3 In 1 Usb Cable can be said to have deeply affected our work and life. We believe that with the technical development of 3-in-1 mobile phone data cable, it will bring us more convenient transmission experience.
3 In 1 Usb Cable,3 In 1 Data Cable,3 In 1 Usb C Cable,3 In 1 Universal Cable
Henan Yijiao Trading Co., Ltd , https://www.yjusbcable.com