With the rapid development of the LED lighting industry, the LED power supply market is also rapidly expanding. On the one hand, traditional power supply companies have introduced LED power products; on the other hand, many entrepreneurial companies have also established. The power technology is not yet mature, relevant standards have not been introduced, and the market is chaotic.
The market expansion price war started in 2010. The LED industry was mixed and the market was expanding at a high speed, but not all participants made money. Most of the LED street lights do not make money, do LED tunnel lights earn some living expenses; do business lighting companies in foreign trade ability to make money, chip companies have made money, before a lot of domestic chip companies have been at a loss state, 2010 There has been a turn for the better; packaging companies have made money because the LED modules in 2010 are "not married."
It is worth noting that most LED power companies also make money, but there is no such situation as LED chips out of stock, because LED power is technically a traditional electronics industry, China's electronics industry already has strong manufacturing capabilities. But the industry has not risen for how long the price war has started, especially in the field of low-power power supplies. It is understood that the price of low-power LED power supply has been very transparent, such as the price of LED fluorescent lamp power supply is generally around 245 yuan.
However, high-power LED power is still in the high profits, one of which is that the technical threshold is relatively high and the capital investment is large. Another reason is that high-power LED power supplies are mainly used in street lamps and tunnel lights. Currently, these lamps are mainly used in government demonstration projects. In order to demonstrate good results, street lamp manufacturers used the best accessories (at least on sample lamps), causing manufacturers to put forward higher requirements for power plants, and also raised profits. The survey found that the business of LED power supply manufacturers such as Ming Wei, Infinity, and Mosuo has increased several times in 2010.
Power supply technology is not yet mature It is understood that the quality of LED power supplies for indoor lighting is now very unstable, and one or two of the ten will have flickering after a period of time.
Huafei Chao, chairman of Infinity, believes that when designing power supplies, some small plants only consider that they can work. They do not take into account the working environment, and sometimes LED lights need to work in harsh environments.
Nanjing North Huihua Xu Changchun believes: "The threshold of LED power supply is indeed not high, but it is not easy to do well. To achieve good development, good materials and good production, sometimes there is no problem with the sample, but after a large amount of time may be There was a batch problem." "Guangdong has some components that are quoted in pounds, and we use quotes that are based on prices," he added.
Although most of the failures of LED lamps occur on the power supply, they cannot blame the power companies. Xu Liancheng, an expert in LED street lamps, told reporters that power failure is the result of a combination of multiple factors, many of which are caused by the unreasonable design of lighting companies. To effectively reduce the power supply failure, it is also necessary for power companies and lighting companies to strengthen their interaction and work together.
According to incomplete statistics, about 80% of the failures caused by LED lamps and lanterns products come from the power supply. From the past few years, the LED light source product packaging technology has been continuously improved and the cooling technology has been continuously developed. The stability of the light source has reached a relatively good level, even if there are It is also the light decay and color drift, which is mainly caused by the unreasonable design of heat dissipation. The situation of direct necrosis has been very small. Relatively speaking, the problem of power supply is much more serious. When a problem arises, it is usually a direct dead light or flashing, and the frequency of occurrence is relatively high.
Of course, there are still many shortcomings, such as the lack of standards, which led to increased maintenance costs of the manufacturers, is not conducive to the development of the LED industry.
The market expansion price war started in 2010. The LED industry was mixed and the market was expanding at a high speed, but not all participants made money. Most of the LED street lights do not make money, do LED tunnel lights earn some living expenses; do business lighting companies in foreign trade ability to make money, chip companies have made money, before a lot of domestic chip companies have been at a loss state, 2010 There has been a turn for the better; packaging companies have made money because the LED modules in 2010 are "not married."
It is worth noting that most LED power companies also make money, but there is no such situation as LED chips out of stock, because LED power is technically a traditional electronics industry, China's electronics industry already has strong manufacturing capabilities. But the industry has not risen for how long the price war has started, especially in the field of low-power power supplies. It is understood that the price of low-power LED power supply has been very transparent, such as the price of LED fluorescent lamp power supply is generally around 245 yuan.
However, high-power LED power is still in the high profits, one of which is that the technical threshold is relatively high and the capital investment is large. Another reason is that high-power LED power supplies are mainly used in street lamps and tunnel lights. Currently, these lamps are mainly used in government demonstration projects. In order to demonstrate good results, street lamp manufacturers used the best accessories (at least on sample lamps), causing manufacturers to put forward higher requirements for power plants, and also raised profits. The survey found that the business of LED power supply manufacturers such as Ming Wei, Infinity, and Mosuo has increased several times in 2010.
Power supply technology is not yet mature It is understood that the quality of LED power supplies for indoor lighting is now very unstable, and one or two of the ten will have flickering after a period of time.
Huafei Chao, chairman of Infinity, believes that when designing power supplies, some small plants only consider that they can work. They do not take into account the working environment, and sometimes LED lights need to work in harsh environments.
Nanjing North Huihua Xu Changchun believes: "The threshold of LED power supply is indeed not high, but it is not easy to do well. To achieve good development, good materials and good production, sometimes there is no problem with the sample, but after a large amount of time may be There was a batch problem." "Guangdong has some components that are quoted in pounds, and we use quotes that are based on prices," he added.
Although most of the failures of LED lamps occur on the power supply, they cannot blame the power companies. Xu Liancheng, an expert in LED street lamps, told reporters that power failure is the result of a combination of multiple factors, many of which are caused by the unreasonable design of lighting companies. To effectively reduce the power supply failure, it is also necessary for power companies and lighting companies to strengthen their interaction and work together.
According to incomplete statistics, about 80% of the failures caused by LED lamps and lanterns products come from the power supply. From the past few years, the LED light source product packaging technology has been continuously improved and the cooling technology has been continuously developed. The stability of the light source has reached a relatively good level, even if there are It is also the light decay and color drift, which is mainly caused by the unreasonable design of heat dissipation. The situation of direct necrosis has been very small. Relatively speaking, the problem of power supply is much more serious. When a problem arises, it is usually a direct dead light or flashing, and the frequency of occurrence is relatively high.
Of course, there are still many shortcomings, such as the lack of standards, which led to increased maintenance costs of the manufacturers, is not conducive to the development of the LED industry.
Incremental encoders provide speed, direction and relative position feedback by generating a stream of binary pulses proportional to the rotation of a motor or driven shaft. Lander offers both optical and magnetic incremental encoders in 4 mounting options: shafted with coupling, hollow-shaft, hub-shaft or bearingless. Single channel incremental encoders can measure speed which dual channel or quadrature encoders (AB) can interpret direction based on the phase relationship between the 2 channels. Indexed quadrature encoders (ABZ) are also available for homing location are startup.
Incremental Encoder,6Mm Solid Shaft Encoder,Hollow Rotary Encoder,Elevator Door Encoder
Jilin Lander Intelligent Technology Co., Ltd , https://www.landerintelligent.com