SYL-17
Insulating glass dew point meter
one,
Insulating glass dew point meter
in accordance with
GB/T11944-2002
"Insulating Glass Standard" method for testing dew point
The system is made of electronic refrigeration and digital display temperature, which has the advantages of simple operation and intuitive display.
two,
Insulating glass dew point meter
Instructions
※
The external circulating water must be turned on before use to ensure that there is circulating water in the pipeline, and all the cables can be plugged in before powering on. After the equipment is tested, first turn off the power and then turn off the circulating water. Please follow the instructions, otherwise the customer will be responsible for the consequences of improper operation.
l
Connect the temperature sensor and the voltage regulator plug to the corresponding plug of the hole dew point display.
The main power plug is inserted into the corresponding jack, the power switch is turned on, and the indicator light is on.
often.
2
Press
"
Water supply
â€
Button, system works, automatically adjusts the temperature according to the set temperature
(-62
°C
)
.
3
When the temperature reaches the standard required temperature, please press the timer
"RST"
Key, the system automatically starts timing according to the set time. After the time arrives, the alarm buzzer alarms and works.
The indicator light is off.
4
After the test is completed, the system is powered off first, then the external circulating water is turned off.
5
,
Time parameter setting
Press
"
>
â€
Key, time display, the lower row of the tube of the instrument is shining, press
"
∧
â€
Key
The value can be modified (the meter unit time is seconds).
6
,
Temperature parameter setting
Press
"SET"
Key, temperature display table, the lower row of digital tube is shining, press
â€
>
â€
Key, move the cursor to the corresponding position of the digital tube, and then press
"
∧
â€
,
"
∨
â€
The temperature can be modified by pressing the key. Press again after the modification is complete
"SET"
The key is saved.
7
For other parameter settings for timers and temperature control instruments, see the instrument manual.
KNL5-100 Residual Current Circuit Breaker
KNL5-100 Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNL5-100 Molded Case Circuit Breaker,KNL5-100 Small Size Molded Case Circuit Breaker,KNL5-100 Electrical Molded Case Circuit Breaker,KNL5-100 Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmannualmotorstarter.com