The "Ten Cities and Ten Thousand Miles" demonstration project has different evaluations from all walks of life. I think the results are the main one because it promotes the rapid development of the semiconductor lighting industry. At present, the semiconductor lighting energy-saving project has been deeply rooted in the hearts of the people. The Ministry of Science and Technology has promoted the “Ten Cities and Ten Thousand†semiconductor lighting application demonstration project in a timely manner by “pilot first, post-demonstration and re-promotionâ€. The local government's positive response has far exceeded 21 pilot cities. Local leaders have taken semiconductor lighting as a strategic emerging industry for energy conservation and carbon reduction. LED street lamps have been lit up in hundreds of cities across the country, and at the same time bring LED knowledge. The great popularity, the awareness of energy saving and carbon reduction, is very encouraging and good.
However, the "Ten Cities and Ten Thousand Cities" also have some problems in the process of implementation. In 2009, “Ten Cities and Ten Thousand Cities†was not a pilot but was fully blossomed. The coordination between the science and technology departments and the construction department was insufficient. The construction department was the user. The science and technology departments and construction departments of the demonstration cities should coordinate and organize the pilot work. It should be evaluated according to the demonstration effect and then promoted. Now it is a call, letting go, and more than 100 cities across the country have blossomed. The country has become a testing ground for LED street lights. Most of them are low-level redundant construction, blind investment, blind launch, blindly transforming economic benefits.
Judging from the development of the “Ten Cities and Ten Thousand Cities†in 2009, most enterprises lack lighting knowledge and literacy, blindly enter, blindly invest, generally impetuous, and quick success. In some places, the “Ten Cities and Ten Thousand Miles†is simply understood as the “Ten Cities and Ten Thousand Miles†of LED street lights. It is wrong to think that there is no application standard for LED lighting products, and only the high-power, high-bar main road motor vehicle traffic road lighting is erroneously A streetlight with a light distribution design installs all the roads, and the products made cannot meet the requirements of the users. As far as "urban road lighting" is concerned, there is no standard, and there are standards that are not implemented. This year, the semiconductor lighting standards have been basically improved, and various application fields have a relatively complete standardization system. Enterprises and application departments should read standards, correctly understand standards, select standards, and strictly enforce standards. Products must be sent to third parties for testing. Raise the threshold, strictly grasp and guarantee the quality, eliminate the backward products, resolutely stop the low-quality and inferior products from flooding the market, and cannot make the semiconductor lighting energy-saving industry into an industry that wastes resources and consumes energy, and cannot let consumers lose confidence in LED products.
Traditional high-pressure sodium lamps, metal halide lamps, etc. have a uniform series of specifications, which makes these products very interchangeable. If the LED manufacturers make their own set of specifications, it will inevitably lead to the loss of consumables. In the future, a certain manufacturer will use a manufacturer's lamps. If the manufacturer turns the product or closes, it will have to scrap the original lamps. , causing waste. Therefore, the standardization of LED product series specifications needs to be developed. LED enters the field of general lighting, and it is also necessary to carry out standardization of series specifications as soon as possible. This is also the mature performance and inevitable way of the industry.
Lighting is a people-oriented, scientific development undertaking, and the barriers to entry are low, but it is not easy to do well. No institution, a department, or a company can grasp the full connotation of lighting technology, and continue to promote the combination of the semiconductor industry and the architectural lighting industry, and strengthen each other. Understand, understand and communicate, learn from each other basic concepts, knowledge and standards, truly implement the people-oriented scientific development concept, and develop the semiconductor lighting energy-saving industry scientifically, healthily and orderly.
Focusing on the “Ten Cities and Ten Thousand Citiesâ€, there are steps to develop LED standards. We will implement the policies of “Ten Cities and Ten Thousand Cities†to optimize semiconductor lighting products that can truly replace traditional lighting. On the one hand, many domestic manufacturers have changed the LED “Ten Cities and Ten Thousands†mistakes into a glimpse of the LED street lights “Ten Cities and Ten Thousandsâ€. On the other hand, the integration of resources, the formation of synergy, the use of LED color saturation, controllable, colorful features, diversified applications, indoor and commercial lighting as a breakthrough, to take out the "revolutionary" LED can truly replace traditional lighting "product.
Rigid-flex board is a circuit board with FPC characteristics and PCB characteristics formed by combining flexible circuit boards and rigid circuit boards according to relevant process requirements through lamination and other processes.
The rigid-flex board has both the characteristics of FPC and the characteristics of PCB. Therefore, it can be used in some products with special requirements. It has both a certain flexible area and a certain rigid area, which saves the internal space of the product and reduces the The finished product volume is of great help in improving product performance.
Rigid-Flexible Board,Rigid-Flexible Circuit Board,Rigid-Flexible PCB Fabricator,Rigid-Flexible PCB Manufacturer,Rigid-Flexible PCB Supplier
Huizhou Liandajin Electronic Co., Ltd , https://www.ldjcircuitboard.com