2.Main features:
Application:
CNC Spindles of are widely used for mould processing, metal cutting,plastic working and other fields.
Characteristics:
1.With the use of P4 grade angular contact bearings,the strength and rigidity of electrospindles are greatly improved,and the RPM can reach 12000r/min.
2.High precision dynamic balancing testing is conducted on all rotable parts,with the tolerance value of less than G0.4.
3.The good sealing desigh can dffectively prevent the intrusion of cutting oil and outer matters.
4.Spindles adopt the pil cooling mode to keep a low temperature rise.
4.The central dewatering unit is optional.
3.Technical parameters
Main technical parameters | |||||
Spindle specification |
BT40-φ150 |
Spindle tension |
9KN |
Nose deviation |
0.003mm |
Spindle RPM |
8000rpm |
Spindle bearing |
NSK P4 class |
Belt deviation |
0.002mm |
Motor power |
7.5/11.5kw |
Tension mode |
Four class |
Normal temperature rise |
Room temperature +18° |
Balance grade |
G1 |
Installation method |
Vertical |
Belt specification |
8YU-48T |
4.Outline diagram:
5.Our factory
6.Our Certifications:Â
8.Packaging&delivery
Packing Details  : Packing in standard export wooden case.
Delivery Details : 3-30 days after receipt of payment.
Â
2.Main features:
Application:
CNC Spindles of are widely used for mould processing, metal cutting,plastic working and other fields.
Characteristics:
1.With the use of P4 grade angular contact bearings,the strength and rigidity of electrospindles are greatly improved,and the RPM can reach 12000r/min.
2.High precision dynamic balancing testing is conducted on all rotable parts,with the tolerance value of less than G0.4.
3.The good sealing desigh can dffectively prevent the intrusion of cutting oil and outer matters.
4.Spindles adopt the pil cooling mode to keep a low temperature rise.
4.The central dewatering unit is optional.
3.Technical parameters
Main technical parameters | |||||
Spindle specification |
BT40-φ150 |
Spindle tension |
9KN |
Nose deviation |
0.003mm |
Spindle RPM |
8000rpm |
Spindle bearing |
NSK P4 class |
Belt deviation |
0.002mm |
Motor power |
7.5/11.5kw |
Tension mode |
Four class |
Normal temperature rise |
Room temperature +18° |
Balance grade |
G1 |
Installation method |
Vertical |
Belt specification |
8YU-48T |
4.Outline diagram:
5.Our factory
6.Our Certifications:Â
8.Packaging&delivery
Packing Details  : Packing in standard export wooden case.
Delivery Details : 3-30 days after receipt of payment.
Â
SMA means surface mount assembly. It is a new generation of electronic assembly technology, which compresses traditional electronic components into a device with a volume of only a few tenths.
Surface mounting is not a new concept, it is derived from earlier processes, such as flat mounting and mixed mounting.
For the assembly of electronic circuits, a point-to-point wiring method was initially adopted, and there was no substrate at all. The packaging of the first semiconductor device uses radial pins, which are inserted into the through holes of the monolithic circuit boards that have been used for the packaging of resistors and capacitors. Active components have been widely used in the past ten years.
Zener Diodes,Surface Mount Standard Rectifiers,Smd Bridge Rectifier,zener diodes manufacturers
Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com