Beijing time on December 14th news, according to foreign media reports, the US Department of Transportation announced today that the agency is considering the development of new regulations requiring the new car to be equipped with vehicle-to-vehicle communication technology (V2V).
As the name suggests, vehicle-to-vehicle communication technology allows vehicles to communicate with each other, alerting drivers to potential traffic accidents and preventing collisions. The underlying technology is the use of dedicated short-range radios to allow vehicles to communicate and to transmit data such as position, speed, direction and braking status. The US Department of Transportation claims that this radio technology will reach a range of 300 meters, farther than radar and camera sensors, and is less susceptible to obstacles or other vehicles.
The US Department of Transportation hopes that vehicle-to-vehicle communication can be used to warn drivers of the imminent risk, especially when cornering or changing lanes. The agency also said that self-driving cars will also benefit from this additional data.
Transportation Minister Anthony Fox said: "Once deployed, vehicle-to-vehicle communication will provide 360-degree road condition awareness and help us enhance vehicle safety." The National Highway Traffic Safety Administration estimates vehicle-to-vehicle and vehicle-to-infrastructure Communication technology (V2I) will be able to reduce up to 80% of non-damaging collisions.
The technology will also consider privacy issues. The Ministry of Transportation says that car-to-car communication does not transmit personal information about drivers or vehicles, but only general security information. The system will also ensure network security and protect data during cyber attacks.
Right now, the new regulations are still in the planning stage and require 90 days of public advice. After that, the Highway Traffic Safety Administration will evaluate and adjust the proposal as necessary, and then wait for the final approval of the relevant department. (compile / sail)
2.5MM Wire To Board Connectors
2.5MM Wire To Board Connectors.
Connectors can be classified into three basic types: line to line, line to board and board to board. These three types of connections are not entirely different. There are two reasons for this type of overlap. First of all, the design of the same connector only needs to be redefined after slightly changing the connection mode, that is to say, it becomes a new design scheme that can be applied to another type of connection mode; secondly, a cable can be installed with a line to line connector at one end and a line to board connector at the other end during assembly, for example, the appearance of class 5 I / O connector is the most common one See for example. If we avoid the fuzziness of this kind of connection, it will provide an effective basis for connector classification.
2.5MM Wire To Board Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com