Best Quality Electric Enameled Copper Clad Aluminum Wire for Cable

 Enameled wire
 General introduction
 
Enameled wire is mainly composed of conductor and insulation layer. The main production process includes annealing the conductor and enameling several time on the surface to get relatively thin insulation but high break-down voltage. In recent years, with the rapid development of electrical and electronic products, enameled wire has been applied to various fields of production and life, such as various types of motors, transformers, rectifiers, voice coil, electromagnetic inductance coil.

 Classification of enamel wire

 Classification by conductor
A  enameled copper wire
 
Advantages: as the most traditional type of enameled wire, the application field is wide, soldering convenient, performance stable.
Disadvantages: high cost of production.
 
B Enameled copper clad aluminum wire
Advantages: as envelope alternatives of pure enameled copper wire, it has good performance of high frequency transmission, originally it was applied in various types of high-frequency electromagnetic induction coil; now in order to save more production cost, ECCA wire has been widely used in various types of electronic coils, transformers, inductors, rectifiers, and all kinds of large and small motors, and has excellent soldering performance. Its density is low, the weight of the unit product can at least save 40% of the copper wire, it can save a lot of cost of production material. Disadvantages: the tensile strength is about 50% of pure copper wire, Ecca wire will break more frequently than copper wire.
C  Enameled aluminium wire
 
Advantages: due to much lower density than copper clad aluminum wire, weight per unit product can save at least 60% than the copper wire. Using aluminium wire will save much more cost of production materials.
 
Disadvantages: tensile strength is about 30%-40% of the copper wire, the conductor is easy to stretch during production; 
The surface of the aluminum conductor is not easy to direct solder, special treatment of welding joints is required.




   Enameled wire
 General introduction
 
Enameled wire is mainly composed of conductor and insulation layer. The main production process includes annealing the conductor and enameling several time on the surface to get relatively thin insulation but high break-down voltage. In recent years, with the rapid development of electrical and electronic products, enameled wire has been applied to various fields of production and life, such as various types of motors, transformers, rectifiers, voice coil, electromagnetic inductance coil.

 Classification of enamel wire

 Classification by conductor
A  enameled copper wire
 
Advantages: as the most traditional type of enameled wire, the application field is wide, soldering convenient, performance stable.
Disadvantages: high cost of production.
 
B Enameled copper clad aluminum wire
Advantages: as envelope alternatives of pure enameled copper wire, it has good performance of high frequency transmission, originally it was applied in various types of high-frequency electromagnetic induction coil; now in order to save more production cost, ECCA wire has been widely used in various types of electronic coils, transformers, inductors, rectifiers, and all kinds of large and small motors, and has excellent soldering performance. Its density is low, the weight of the unit product can at least save 40% of the copper wire, it can save a lot of cost of production material. Disadvantages: the tensile strength is about 50% of pure copper wire, Ecca wire will break more frequently than copper wire.
C  Enameled aluminium wire
 
Advantages: due to much lower density than copper clad aluminum wire, weight per unit product can save at least 60% than the copper wire. Using aluminium wire will save much more cost of production materials.
 
Disadvantages: tensile strength is about 30%-40% of the copper wire, the conductor is easy to stretch during production; 
The surface of the aluminum conductor is not easy to direct solder, special treatment of welding joints is required.




 

Plastic Phone Ring Holder

Plastic phone ring holder are mainly made of acrylic material. The ring is made of Zinc alloy. Rotate 360 degree and vertical 180 degree is very convenient. it also can be folded. Fashion and useful. You can use it thousands times.There will be no trace left.Will not be robbed, not sliding, will not fall, sticky strong.

   It also called: finger buckle, mobile phone ring, ring bracket, mobile phone holder, 360 bracket, ring frame, mobile phone grip Mobile phone ring frame, iphone mobile phone bracket, ring bracket, finger buckle hook, mobile phone ring bracket, telephone stent.
   We also can customize Logo and accroding to your demand products you want. Some design gift is also can be customized. There is nothing we cannot do but something you cannot predict.

Plastic Phone Ring Holder

Plastic Phone Ring Holder,Custom Plastic Phone Ring Holder,Promotional Plastic Phone Ring Holder,Plastic Hand Ring Holder For Phone

Dongguan Qilong Electronic Co., Ltd. , http://www.venicen-ringholder.com